Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear light of the Subaru Forester?

Model: Subaru Forester MK 2, SG - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Tail light

See other generations:
Video tutorial

To remove the rear light of the Subaru Forester, open the rear hatch of the vehicle to access the two screws located at the sides of the corresponding light: these screws must be loosened and completely removed so that the light can be pulled out from its housing.

This will allow you to disconnect the connector attached to the light unit, removing it completely from its seat and connecting the new light.

This should then be secured in its housing with the appropriate screws removed earlier.


Updated on 31 August 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs on the Subaru Forester
How to Replace the Rear Light Bulbs on the Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) This guide will show you how to remove and replace the rear light and its bulbs on the Subaru Forester in simple steps. First, open the boot lid and …
How to Replace the Rear Wiper on a Subaru Forester 3
Subaru Forester (2008-2011 / MK 3, SH) In this short and simple video, see how to remove and replace the rear wiper on a 2010 Subaru Forester Mk3. First, move to the rear and begin lifting…
How to Replace the Rear Wiper of the Subaru Forester
How to Replace the Rear Wiper of the Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) The rear wiper of the Subaru Forester ensures excellent cleanliness and visibility at the rear of the vehicle. For this reason, regular maintenance i…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos