Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wiper of the Subaru Forester

Model: Subaru Forester MK 4, SJ - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Windshield wipers

See other generations:
Video tutorial

The rear wiper of the Subaru Forester ensures excellent cleanliness and visibility at the rear of the vehicle. For this reason, regular maintenance is essential, and it should be replaced when necessary.

To do this, it only takes a few minutes. Follow the instructions carefully.

Before proceeding, ensure that you have turned off the engine and parked the car on a level surface. Then, lift the rear wiper and push it outward to remove the arm. At this point, fit the replacement model and clean the glass if there are any dirt residues.

Finally, lower the wiper.


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Wiper on the Subaru Forester
How to Replace the Rear Wiper on the Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) In this brief and simple guide, you will learn how to remove and replace the rear wiper of the Subaru Forester, following the instructions below. Fir…
How to Replace the Rear Wiper on a Subaru Forester 3
Subaru Forester (2008-2011 / MK 3, SH) In this short and simple video, see how to remove and replace the rear wiper on a 2010 Subaru Forester Mk3. First, move to the rear and begin lifting…
How to Replace the Rear Wiper Blade on a Subaru Forester?
How to Replace the Rear Wiper Blade on a Subaru Forester?
Subaru Forester (2008-2011 / MK 3, SH) To replace the rear wiper blade on a Subaru Forester, lift the blade so that it is not in contact with the rear screen. Once the blade is lifted, til…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos