Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door Panel of the Subaru Forester

Model: Subaru Forester MK 4, SJ - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

In this guide, follow the procedure necessary to remove and replace the rear door panel of the Subaru Forester. First, open the rear door and start by removing the plastic screws found on the door panel; use a cross-head screwdriver as shown in the video.

At this point, pry at the sides of the panel to remove it, disconnecting the electric connector of the window switch and the handle opening cable; then refit everything by applying the reverse procedure of disassembly!


Updated on 8 May 2026 by ScegliAuto


Related tutorials

Removing the Door Panel of a Subaru Forester
Removing the Door Panel of a Subaru Forester
Subaru Forester (2002-2008 / MK 2, SG) How to remove the door panel on a Subaru Forester? Don't worry, follow these steps. Before starting the disassembly, disconnect the battery terminals…
Removing the Door Panel of the Subaru Forester 4
Removing the Door Panel of the Subaru Forester 4
Subaru Forester (2012-2019 / MK 4, SJ) In this simple guide, learn how to remove the front door panel of the fourth generation Subaru Forester. First, open the front door and start by unsc…
Removing the rear light of the Subaru Forester
Removing the rear light of the Subaru Forester
Subaru Forester (2008-2011 / MK 3, SH) Today's guide will show you how to remove and replace the rear light of the Subaru Forester, following the instructions below. First, move to the rea…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos