Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the storage compartment in the Subaru Forester?

Model: Subaru Forester MK 4, SJ - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Glove compartment

See other generations:
Video tutorial

In this tutorial we can see how to disassemble the glove compartment in the Subaru Forester, an extremely simple and quick operation, to be carried out for example in case we need to replace the cabin filter. First of all, go to the passenger side, then open the compartment, empty it and unhook the end stop shock absorber located on the right side.

Then grab the two side walls, press them inwards and at the same time unhook the drawer from the dashboard. Once the filter is replaced, we can reassemble everything by following the reverse procedure.


Posted on 15 December 2024 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Subaru Forester 5
How to Replace the Cabin Filter on a Subaru Forester 5
Subaru Forester (2018-2025 / MK 5, SK) In this mini guide dedicated to your Subaru Forester fifth generation (2019-2023), we will discover how to correctly and independently replace the ca…
How to replace the cabin air filter in the Subaru Forester 2
How to replace the cabin air filter in the Subaru Forester 2
Subaru Forester (2002-2008 / MK 2, SG) In this video, we will see how to disassemble and replace the cabin air filter in the second series Subaru Forester, following these simple steps. Fi…
How to Replace the Key Fob Battery for the Subaru Forester
How to Replace the Key Fob Battery for the Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) This guide will illustrate the steps needed to disassemble and replace the battery of the key fob for the Subaru Forester. First, take your key fob a…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos