Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Discs and Pads

Model: Subaru Outback BM, MK 4, BR - Years 2009-2014
Part: Brake pads

Once the vehicle is raised on a lift or supported by appropriate axle stands, remove the front wheel. Leverage between the disc and pads to retract the piston and facilitate the removal of the caliper. At this point, unscrew the caliper mounting bolts located at the rear and remove it; then extract the old pads and proceed to remove the caliper bracket to access the disc. Clean the new disc of protective oil before fitting it, reattach the caliper bracket, insert the new pads, and finally refit the caliper.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Brake Discs
How to Replace Brake Discs
Subaru Outback (1999-2003 / BE, BH, MK 2) The following guide provides useful instructions on how to replace the brake discs on your car. The braking system is of utmost importance to ensure …
Replacement of the front brake pads of the Subaru Outback MK4
Replacement of the front brake pads of the Subaru Outback MK4
Subaru Outback (2009-2014 / BM, MK 4, BR) Let's see in this video how to remove and replace the front brake discs and pads of the Subaru Outback fourth series, following the instructions belo…
Replacement of Rear Discs and Pads
Replacement of Rear Discs and Pads
Subaru Outback (1999-2003 / BE, BH, MK 2) To perform maintenance on the rear brakes, lift the vehicle on suitable car stands and remove the rear wheel; then remove the retaining pins of the b…

How to Remove the Driver's Side Airbag (Steering Wheel) on a BMW 3 Series

How to remove the driver's side airbag (steering wheel) on a BMW 3 Series? This operation is very simple if you follow the steps. Let's see in this guide how to proceed: insert a medium-length screwdriver into the rear slots on the steering wheel and turn until you release the clips that hold the airbag. Once the airbag is disconnected, disconnect the power connectors and remove it from the steering wheel. For reinstalling the airbag: connect the power connector, then press it onto the steering wheel until the locking clips snap into place inside the steering wheel.

Watch the video!


by ScegliAuto

More videos