|
Do it yourself
| |||
| ||||
Replacement of Rear Discs and Pads
Model: Subaru Outback
MK 2, BH, BE
- Years:
1999, 2000, 2001, 2002, 2003
Video tutorial
To perform maintenance on the rear brakes, lift the vehicle on suitable car stands and remove the rear wheel; then remove the retaining pins of the brake caliper from the support and detach it from its housing, extract the old pads and remove the caliper support; at this point, remove the disc from the hub, clean the housing with a metal brush, and apply grease before installing the new disc, which should be cleaned of protective oil; then refit the caliper support, insert the new sliding plates, the new pads, and retract the caliper piston using a C-clamp before refitting it.
Updated on 20 February 2026 by ScegliAuto
Related tutorials
Subaru Outback
(2009-2014 /
MK 4, BM, BR)
Once the vehicle is raised on a lift or supported by appropriate axle stands, remove the front wheel. Leverage between the disc and pads to retract t…
Subaru Outback
(2014-2019 /
MK 5, BS)
This video tutorial shows how to replace the old brake pads on a Subaru Outback, model produced from 2014 to 2019. To start, lift the car and remove …
Subaru Outback
(1999-2003 /
MK 2, BH, BE)
Remove the wheel and gently detach the caliper by removing the two retaining clips with two large screwdrivers or the appropriate tools. Unscrew the …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Tyre Pressure Monitoring System (TPMS) Light on the Toyota Yaris
These brief and simple steps will show you how to reset the tyre pressure monitoring system (TPMS) light on the Toyota Yaris. Before resetting the light, ensure that all four tyres are at the correct operating pressure. Get inside the vehicle on the driver's side and locate the TPMS reset button found at the bottom left of the dashboard (next to the steering wheel); press and hold it until the TPMS light on the instrument cluster resets, following the video until the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |