Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear wiper blade on your Subaru Forester?

Model: Subaru Forester SH, MK 3 - Years 2008-2011
Part: Windshield wipers

To be able to replace the rear windscreen wiper blade of the Subaru Forester it is necessary to lift the blade so that it is not in contact with the rear window: once the blade has been raised, it will be necessary to tilt it arranging it at ninety degrees with respect to the corresponding arm. In this way it will be possible to release the fixing pin of the blade to the corresponding arm, removing it completely: at this point it will be possible to position the new blade on the arm, fixing it and placing it in contact with the rear window to check that everything works.

Posted on 18 February 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front windshield wipers of the Subaru Forester
How to replace the front windshield wipers of the Subaru Forester
Subaru Forester (2008-2011 / SH, MK 3) Today we will see the instructions that will allow us to disassemble and replace the front windshield wipers of the Subaru Forester. First, let's mov…
How to replace the rear wiper on the Subaru Forester
How to replace the rear wiper on the Subaru Forester
Subaru Forester (2012-2019 / SJ, MK 4) Let's see, in this short and simple guide, how to disassemble and replace the rear window wiper of the Subaru Forester, following the instructions be…
How to replace the rear wiper on Subaru Forester 3
Subaru Forester (2008-2011 / SH, MK 3) Let's see in this short and simple video how to remove and replace the rear wiper of the Subaru Forester third series, of 2010. First, let's move to …

How to Remove the Front Seats from a Classic Fiat 500

How to remove the front seats from a classic Fiat 500? In this video, follow these steps: first, slide the seats forward and lift them up, then unscrew the retaining bolts on the rails fixed to the car's chassis using a socket or impact driver (use appropriate release agents if the bolts do not unscrew). Remove the retaining bolts at the bottom of the car (use spanners on both the upper and lower parts of the connecting bolts). Finally, install the new front seat by following the disassembly steps mentioned earlier.

Watch the video!


by ScegliAuto

More videos