Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Subaru Ascent Radio?

Model: Subaru Ascent MK 1 - Years 2018-2026
Part: Warning light – error code

Reset the Subaru Ascent radio using three buttons located on the radio itself: power, tune, and cd eject. Press these buttons simultaneously for at least 10 seconds. Release them when the radio starts resetting and it reboots. When should you perform this procedure? Whenever the radio does not function as it should. Some examples of issues that can be resolved with this reset include a frozen screen (stuck on one display), a non-responsive touch screen, and other software errors.

Updated on 20 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Subaru Ascent (2018-2026 / MK 1) To remove the radio from a Subaru Ascent, use a tool like a screwdriver to pry off the two air vents located on either side of the radio. Once these …
Subaru Ascent (2018-2026 / MK 1) To reset the Oil Change light on a Subaru Ascent, press and hold the VIEW button located in the center of the dashboard, below the display. This will…
Subaru Ascent (2018-2026 / MK 1) This guide provides instructions on how to remove and replace the front door panel on a Subaru Ascent in simple steps. First, open the front door and…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos