Do it yourself
| ||||
|
Subaru Ascent - Video tutorial
Model: Subaru Ascent
MK 1
- Years 2018-2024 In order to remove the car radio from the Subaru Ascent you need to pry an object such as a screwdriver, so that the two air vents on the sides of the radio can be detached. Once these have been removed, it will be possible to go and unscrew their screws underneath, which fix the car radio inside its housing. Once these have been unscrewed, it will be necessary to remove the control panel located above the radio, so that it can be removed and the connectors in its rear part disconnected. After removal, you will be able to go and connect the new device, installing it together with all the removed components.
Posted on 9 May 2024 by ScegliAuto
Other guides that may interest you |
How to reset the service in the Opel Antara?As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.031
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |