Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter in the Subaru Ascent

Model: Subaru Ascent MK 1 - Years 2018-2026
Part: Engine oil

Today, let's see how to perform the routine maintenance service by replacing the engine oil and oil filter in the Subaru Ascent. First, lift the vehicle and start draining the oil by removing the drain plug located on the oil pan, allowing it to drain into a container for about ten minutes; then remove and replace the oil filter cartridge located in the engine compartment, as shown in the video. At this point, remove the fill cap and top off with new oil, checking the oil level with the dipstick!

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace Engine Oil and Oil Filter on Subaru Ascent
Replace Engine Oil and Oil Filter on Subaru Ascent
Subaru Ascent (2018-2026 / MK 1) Follow these steps to perform routine maintenance by replacing the engine oil and oil filter on your Subaru Ascent. First, lift the vehicle and start…
How to Change the Engine Oil and Filter on a Subaru Ascent
How to Change the Engine Oil and Filter on a Subaru Ascent
Subaru Ascent (2018-2026 / MK 1) If you want to DIY the engine oil and filter change on this vehicle model, the text below provides all the steps and useful information for the repla…
How to Change the Engine Oil on a Subaru Ascent
How to Change the Engine Oil on a Subaru Ascent
Subaru Ascent (2018-2026 / MK 1) If you want to change the engine oil and filter on this vehicle model, the instructions below will guide you through the correct procedure. First, op…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos