Do it yourself
Frequently asked questions about cars and motorcycles

Replace Engine Oil and Oil Filter on Subaru Ascent

Model: Subaru Ascent MK 1 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Engine oil

Video tutorial

Follow these steps to perform routine maintenance by replacing the engine oil and oil filter on your Subaru Ascent. First, lift the vehicle and start by unscrewing the oil drain plug located under the engine, allowing the oil to drain into a container for about ten minutes.

Next, use the appropriate wrench to remove and replace the oil filter cartridge with a new one, as shown in the video. Finally, open the hood and top off the oil, pouring in the oil specified in the vehicle's owner's manual!


Updated on 25 May 2026 by ScegliAuto


Related tutorials

Subaru Ascent (2018-2026 / MK 1) Today, let's see how to perform the routine maintenance service by replacing the engine oil and oil filter in the Subaru Ascent. First, lift the vehi…
Subaru Ascent (2018-2026 / MK 1) To change the oil and oil filter on a Subaru Ascent, raise the front of the vehicle. Remove the oil filter using an appropriate wrench. After removin…
Subaru Ascent (2018-2026 / MK 1) If you want to DIY the engine oil and filter change on this vehicle model, the text below provides all the steps and useful information for the repla…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos