Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter on a Subaru Ascent

Model: Subaru Ascent MK 1 - Years 2018-2026
Part: Engine oil

If you want to DIY the engine oil and filter change on this vehicle model, the text below provides all the steps and useful information for the replacement. Once you lift the hood and raise the vehicle, locate the oil drain plug on the side of the oil pan and proceed to unscrew it after placing a container on the ground to catch the used oil. Next, locate the oil filter and unscrew it with the appropriate wrench, replacing it with the new one after lubricating the gasket. After all the used oil has drained out, close the drain plug and return to the engine to fill the system with new lubricant.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter in the Subaru Ascent
How to Change the Engine Oil and Oil Filter in the Subaru Ascent
Subaru Ascent (2018-2026 / MK 1) Today, let's see how to perform the routine maintenance service by replacing the engine oil and oil filter in the Subaru Ascent. First, lift the vehi…
Replace Engine Oil and Oil Filter on Subaru Ascent
Replace Engine Oil and Oil Filter on Subaru Ascent
Subaru Ascent (2018-2026 / MK 1) Follow these steps to perform routine maintenance by replacing the engine oil and oil filter on your Subaru Ascent. First, lift the vehicle and start…
How to Reset the Oil Change Light on a Subaru Ascent?
How to Reset the Oil Change Light on a Subaru Ascent?
Subaru Ascent (2018-2026 / MK 1) To reset the Oil Change light on a Subaru Ascent, press and hold the VIEW button located in the center of the dashboard, below the display. This will…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos