Do it yourself
| ||||
|
Subaru Forester - Video tutorial
Model: Subaru Forester
MK 5, SK
- Years 2018-2024 In order to replace the oil filter of the Subaru Forester you have to go to the lower part of the vehicle, so that you can unscrew the oil drain plug, collecting it inside a container. Once all the oil has been removed, it will be possible to close the tank with the special cap and then open the hood. On the right side of the engine block you will find the oil filter, which can be removed by simply unscrewing it from its housing. Once removed, you can insert the new one and then close the hood.
Posted on 9 October 2022 by ScegliAuto
Other guides that may interest you
|
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.018
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |