Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement for Subaru Forester

Model: Subaru Forester MK 2, SG - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Engine oil

See other generations:
Video tutorial

In this video tutorial, follow the steps to perform the routine maintenance oil change for the Subaru Forester. First, lift the vehicle and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, as shown in the video.

At this point, replace the oil filter with the new one, tightening it by hand; finally, pour in the new oil with the correct specifications!


Updated on 10 May 2026 by ScegliAuto


Related tutorials

Reset of the service light for the Subaru Forester
Reset of the service light for the Subaru Forester
Subaru Forester (2018-2025 / MK 5, SK) The following steps will allow us to reset the service light for the regular maintenance of the engine oil change for the Subaru Forester. First, let…
How to Replace the Engine Oil and Filter of the Subaru Forester Mk4
How to Replace the Engine Oil and Filter of the Subaru Forester Mk4
Subaru Forester (2012-2019 / MK 4, SJ) This guide shows how to change the engine oil and filter of the Subaru Forester Mk4. After opening the engine bay and raising the vehicle, locate the…
How to Service (Oil Change and Oil Filter) a Subaru Forester 2?
How to Service (Oil Change and Oil Filter) a Subaru Forester 2?
Subaru Forester (2002-2008 / MK 2, SG) Today, discover how to carry out the routine maintenance service by replacing the engine oil and oil filter on the second series Subaru Forester. Fir…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos