Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Filter of the Subaru Forester Mk4

Model: Subaru Forester MK 4, SJ - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

This guide shows how to change the engine oil and filter of the Subaru Forester Mk4. After opening the engine bay and raising the vehicle, locate the 14 mm bolt that allows for the draining of the engine oil. Wait for all the fluid to drain and then close the plug; clean any oil residue.

Lower the vehicle and locate the engine oil filter; this is situated on the top of the engine, near the oil filler cap. Clean the metal plate at the base and unscrew the part.

Clean any residue from the filter fitting and lubricate the seal of the new filter with oil before installing it in position. Fill the oil reservoir with the correct quantity and type of fluid; the specifications are defined in the user manual.

Start the engine for a few seconds and check the oil level; top up if necessary.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

Engine Oil Change on a Subaru Forester SJ
Engine Oil Change on a Subaru Forester SJ
Subaru Forester (2012-2019 / MK 4, SJ) In this tutorial video, learn how to change the engine oil and the oil filter on a Subaru Forester SJ, produced from 2012 to 2019. Start by going und…
How to Change the Engine Oil on a Subaru Forester
How to Change the Engine Oil on a Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) In this video tutorial, you will learn how to change the oil and the corresponding filter on a Subaru Forester. First, lift the car and position a co…
How to Reset the Service Light on the Subaru Forester MK4
How to Reset the Service Light on the Subaru Forester MK4
Subaru Forester (2012-2019 / MK 4, SJ) In this video, we will see how to reset the system warning light after completing all the maintenance tasks for the Subaru Forester MK4 as per the ma…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos