Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Change on a Subaru Forester SJ

Model: Subaru Forester MK 4, SJ - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

In this tutorial video, learn how to change the engine oil and the oil filter on a Subaru Forester SJ, produced from 2012 to 2019. Start by going under the vehicle and removing the oil sump plug with a 14mm spanner. Allow all the used oil to drain into a container and let it drain for a few minutes, then replace the plug.

Next, remove the old filter located in the engine bay by simply unscrewing it. Lubricate the gasket of the new oil filter and screw it into position. Once done, add new engine oil and you have completed the job.


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Subaru Forester
How to Change the Engine Oil on a Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) In this video tutorial, you will learn how to change the oil and the corresponding filter on a Subaru Forester. First, lift the car and position a co…
Engine Oil and Oil Filter Replacement for Subaru Forester
Engine Oil and Oil Filter Replacement for Subaru Forester
Subaru Forester (2002-2008 / MK 2, SG) In this video tutorial, follow the steps to perform the routine maintenance oil change for the Subaru Forester. First, lift the vehicle and start by …
Reset of the service light for the Subaru Forester
Reset of the service light for the Subaru Forester
Subaru Forester (2018-2025 / MK 5, SK) The following steps will allow us to reset the service light for the regular maintenance of the engine oil change for the Subaru Forester. First, let…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos