Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the headlight bulb of the Suzuki V-Strom 800, you need to loosen the screws that secure the front fairing of the motorcycle to its housing, so that it can be removed: the screws that secure this fairing will be located along the entire perimeter of the front. By loosening the screws, you can detach the front of the motorcycle and access the panel that covers the front optical group internally: in this way it will be possible to disconnect the connector and remove the bulb from its seat. At this point it will be possible to insert the new one, making sure that everything is functioning correctly.

Posted on 11 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the time on the Suzuki V-Strom 800?
How to adjust the time on the Suzuki V-Strom 800?
V Strom 800 .. can see how to adjust the time on the Suzuki V-Strom 800, an extremely simple and quick operation, to be carried out for example after disconnecting.. …
How to replace the motor oil in the Suzuki V-Strom 800?
How to replace the motor oil in the Suzuki V-Strom 800?
V Strom 800 .. how to replace the engine oil in the Suzuki V-Strom 800, a very simple and quick operation. First of all, make sure that the engine is cold enough,.. …
How do you replace the battery of the Suzuki V-Strom 800?
How do you replace the battery of the Suzuki V-Strom 800?
V Strom 800 .. In order to replace the battery of the Suzuki V-Strom 800, you need to insert the key into the appropriate lock located on the left side of the motorcycle:.. …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos