Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
When the service light comes on the Suzuki Burgman 200 cc model, it means that we need to follow the steps related to resetting the light to complete the maintenance of our scooter. Only performing the reset of the light will not solve the problem, in fact it could cause issues with the vehicle. The steps to follow are: -turn on the motorcycle instrument panel without starting the engine; -press the button below the multifunction display; -wait for the reset to load; -release the button; -turn off and turn on the instrument panel again; With the second ignition, you will have completed the reset of the service light.

Posted on 26 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the engine oil change indicator light (service) on the Suzuki Burgman 200.
Resetting the engine oil change indicator light (service) on the Suzuki Burgman 200.
Burgman 200 Today we will discover the instructions that allow us to reset the maintenance light for the oil change on the Suzuki Burgman 200. We perform the res…
Reset the Engine Oil Warning Light on the Suzuki Burgman 200
Reset the Engine Oil Warning Light on the Suzuki Burgman 200
Burgman 200 Briefly follow the steps to reset the service warning light for the engine oil change on the Suzuki Burgman 200 scooter. First, place the scooter on …
How to reset the oil change light on a Suzuki Burgman 250
How to reset the oil change light on a Suzuki Burgman 250
Burgman 200 In this video, see how simple it is to reset the service light on a Suzuki Burgman 250: the warning light remains illuminated on the right side of th…

How to Replace the Front Headlight Bulb on the Suzuki GS 500?

In this tutorial, you will see how to replace the front headlight bulb on the Suzuki GS 500, a very simple and quick operation. Before proceeding, ensure that the key is not inserted to operate safely. Start by positioning yourself in front of the headlight in question, then locate the two screws at the bottom and unscrew them with a cross-head screwdriver. Next, separate the headlamp from the bracket, disconnect the power connector, and remove the rubber cap. At this point, simply unclip the metal clip, extract the old bulb, and fit the replacement.

Watch the video!


by ScegliAuto

More videos