Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the stator of the Suzuki SV 650, you will need to loosen the screws that secure the circular cover panel located on the right side of the motorcycle: once the panel has been removed, you will be able to locate the stator underneath that will need to be freed from its seat and disconnected from the appropriate cables. At this point, you will be able to insert the new replacement part that must be properly connected and secured: you can then cover everything with the appropriate cover and verify that everything works properly.

Posted on 3 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Suzuki SV 650?
How to replace the engine oil in the Suzuki SV 650?
Sv 650 In this tutorial we can see how to replace the engine oil in the Suzuki SV 650, an extremely simple and quick operation. First of all, make sure that…
How to Replace the Headlight Bulb of a Suzuki SV 650?
How to Replace the Headlight Bulb of a Suzuki SV 650?
Sv 650 To replace the headlight bulb of a Suzuki SV 650, loosen the screws that secure the headlight to its housing: these are located at the bottom right a…
How do you replace the rearview mirrors of the Suzuki SV 650?
How do you replace the rearview mirrors of the Suzuki SV 650?
Sv 650 In order to replace the rearview mirrors of the Suzuki SV 650, you need to loosen the screws that hold them to their housing: these screws can be fou…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos