Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery replacement for Suzuki Andress 110

Model: Suzuki Address 110
Part: Battery

Video tutorial

If the battery of the Suzuki Address 110 is discharged and does not hold subsequent recharge attempts, we must proceed with the replacement. Let's start by unscrewing, with a screwdriver, the two screws on the top edge of the shield, on the inside.

Moving to the front, we slide the central part of the shield, where the Suzuki logo is, and remove it. With a 10mm socket wrench, we unscrew the three bolts that secure the battery mounting bracket. Remove the clamps from the battery terminals and remove it, placing a new one in its place.

Reattach the clamps, secure the bracket, insert the central part of the shield, and tighten the two screws.


Posted on 6 April 2025 by ScegliAuto


Related tutorials

How to Replace the Battery on the Suzuki Address 110 Scooter?
How to Replace the Battery on the Suzuki Address 110 Scooter?
Address 110 In this tutorial, you will see how to replace the battery on the Suzuki Address 110 scooter, a very simple and quick operation. First, ensure that th…
How do you replace the battery of the Suzuki Address 110?
How do you replace the battery of the Suzuki Address 110?
Address 110 In order to replace the battery of the Suzuki Address 110, you need to completely remove the front panel of the motorcycle, which is located just bel…
How do you replace the transmission of the Suzuki Address 110?
How do you replace the transmission of the Suzuki Address 110?
Address 110 The procedure for replacing the transmission on the Suzuki Address 110 requires loosening the screws that secure the transmission cover panel, locate…

How to Replace the Handlebars on the Ducati Scrambler

This guide provides instructions on how to remove and replace the handlebars on the Ducati Scrambler motorcycle, following the steps outlined below. First, place the bike on its centre stand and begin removing the grips by unscrewing the screws and taking off the bar ends; then unscrew the handlebar mounting screws to remove the handlebars, as shown in the video. At this point, correctly install the new handlebars to ensure they are centred; then reassemble and secure the grips and side bar ends, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos