Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the engine oil of the Suzuki V-Strom 650, you need to loosen the drain plug of the oil pan located in the central lower part of the vehicle: once the plug is loosened, you can drain all the used oil into a properly positioned container. At this point, you can remove the old filter located in the front lower part of the motorcycle and replace it with a new one. Finally, you can top up the oil by inserting it through the breather located on the right side of the motorcycle, in the upper part of the appropriate housing.

Posted on 22 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you change the engine oil on a Suzuki V-Strom 650?
How do you change the engine oil on a Suzuki V-Strom 650?
V Strom 650 .. The oil change for the Suzuki V-Strom 650 can be performed by removing the drain plug from the oil reservoir, positioning a container.. …
How do you change the engine oil of the Suzuki V-Strom 650?
How do you change the engine oil of the Suzuki V-Strom 650?
V Strom 650 .. The oil change on the Suzuki V-Strom 650 can be performed by loosening the drain plug located at the lower center of the motorcycle:.. …
How to change the engine oil in a Suzuki DL 650 V-Strom?
How to change the engine oil in a Suzuki DL 650 V-Strom?
V Strom 650 In this tutorial, you will see how to change the engine oil in a Suzuki DL 650 V-Strom, a very simple and quick operation. First, ensure that the eng…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos