Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Transmission oil change for the Suzuki Burgman

Model: Suzuki Burgman 650
Part: Transmission fluid

Video tutorial

To change the final transmission oil of the Suzuki Burgman, we put the scooter on the center stand. We unscrew the four 8mm screws that secure the plastic cover of the transmission and remove it. We place a basin under the drain plug, unscrew the two plugs with a 10mm hex key and let the old lubricant drain.

We use a syringe to aspirate 300cc of 75w90 transmission oil, clean the magnetized drain plug, screw it back into place, inject the new oil into the refill hole until it overflows. Screw the plug back in, replace the plastic cover and tighten the screws.


Posted on 9 August 2025 by ScegliAuto


Related tutorials

How to Reset the Oil Light on a Suzuki Burgman 650
Burgman 650 In this new mini guide dedicated to the Suzuki Burgman 650, we will discover how to manually reset the oil light. First, start this procedure with th…
How do you reset the oil light on the Suzuki Burgman 650?
How do you reset the oil light on the Suzuki Burgman 650?
Burgman 650 Through this video, we can learn how to reset the oil change light after performing maintenance on the Suzuki Burgman 650. With the vehicle turned of…
How to reset the oil warning light on the Suzuki Burgman 650
How to reset the oil warning light on the Suzuki Burgman 650
Burgman 650 If you have just changed the oil on the Suzuki Burgman 650 and still notice the oil warning light is on, do not worry; simply perform the following r…

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos