Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service of the Suzuki V-Strom 800

Model: Suzuki V Strom 800
Part: Service warning light

Video tutorial

These simple steps will allow us to perform the reset procedure of the service light for the routine maintenance of the engine oil change of the Suzuki V-Storm 800 motorcycle. First, we put the motorcycle on the center stand and start the instrument panel; then we turn on the instrument panel and use the controls located on the handlebar to enter the settings menu of the motorcycle, as shown in the video.

At this point, we go to the service option and confirm the maintenance warning reset, following the video tutorial until the end!


Posted on 26 August 2025 by ScegliAuto


Related tutorials

V Strom 800 .. To replace the battery on the Suzuki V-Strom 800, insert the key into the lock located on the left side of the bike: this will allow you to.. …
V Strom 800 .. how to replace the engine oil in the Suzuki V-Strom 800, a very simple and quick operation. First of all, make sure that the engine is cold enough,.. …
V Strom 800 .. can see how to adjust the time on the Suzuki V-Strom 800, an extremely simple and quick operation, to be carried out for example after disconnecting.. …

How to Set the Clock on the Yamaha Xmax 300?

On the Yamaha Xmax 300, you can adjust the clock by turning on the instrument panel, inserting the key into the ignition switch. Once the panel is powered, press and hold the button located on the right side of the handlebars, just below the red button. You will notice the hours start to flash, and you can change them by repeatedly pressing the same button. After a few seconds, the minutes will also start to flash, which can be adjusted using the same method.

Watch the video!


by ScegliAuto

More videos