Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
With this operation we set after how many kilometers we want the service light to come on: insert the key to turn on the dashboard, hold down the right button of the on-board computer for two seconds (it says SL or an arrow). We will see the maintenance light flashing: this means we are in setting mode. Use the left button (Reset) to decrease the interval, and the right button (Sel) to increase it. The interval can be set between 500 and 6000 km. Once the desired value is set, simply turn off the dashboard. To reset the light when it is on, with the dashboard off press the reset button; continue to hold it down and turn on the dashboard. Keep it on until the light, which initially flashes, goes off.

Posted on 11 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Oil Change light on the Suzuki Burgman 650?
How to reset the Oil Change light on the Suzuki Burgman 650?
Burgman 650 To reset the Oil Change light on the Suzuki Burgman 650, turn the ignition key to activate the instrument panel: then press and hold the ADJ button f…
How to Reset the Oil Light on the Suzuki Burgman 650
How to Reset the Oil Light on the Suzuki Burgman 650
Burgman 650 If you have just performed an oil change on your Suzuki Burgman 650 and do not know how to manually reset the related warning light, then this guide …
How to reset the oil warning light on the Suzuki Burgman 650
How to reset the oil warning light on the Suzuki Burgman 650
Burgman 650 If you have just changed the oil on the Suzuki Burgman 650 and still notice the oil warning light is on, do not worry; simply perform the following r…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos