Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Oil Change light on the Suzuki Burgman 650?

Model: Suzuki Burgman 650
Part: Warning light – error code

Video tutorial

To reset the Oil Change light on the Suzuki Burgman 650, turn the ignition key to activate the instrument panel: then press and hold the ADJ button for a few seconds until the remaining kilometres until the oil change starts to flash. This will allow you to modify the interval, reducing the kilometres with the SEL button and increasing them with the ADJ button.

Once the new interval is set, press and hold both buttons and turn off the ignition. Then, while holding the SEL button, turn the ignition back on and wait until the light goes out.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on a Suzuki Burgman 650
Burgman 650 In this new mini guide dedicated to the Suzuki Burgman 650, we will discover how to manually reset the oil light. First, start this procedure with th…
How to Reset the Oil Light on the Suzuki Burgman 650
How to Reset the Oil Light on the Suzuki Burgman 650
Burgman 650 If you have just performed an oil change on your Suzuki Burgman 650 and do not know how to manually reset the related warning light, then this guide …
How to reset the oil warning light on the Suzuki Burgman 650
How to reset the oil warning light on the Suzuki Burgman 650
Burgman 650 If you have just changed the oil on the Suzuki Burgman 650 and still notice the oil warning light is on, do not worry; simply perform the following r…

How to Replace the Gear Oil of the Piaggio Vespa PX 125

To replace the gear oil of the Piaggio Vespa PX 125, loosen the drain plug of the oil reservoir located at the bottom of the transmission casing on the right side of the scooter. Once the plug is loosened, collect all the used oil in a suitably positioned container until it has completely drained. Now, top up the oil through the breather located on the transmission casing using a pump. After adding the new oil, you can start the engine to check that everything is functioning properly.

Watch the video!


by ScegliAuto

More videos