Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Suzuki GSX-S150?

Model: Suzuki Gsx S 150
Part: Engine oil

Video tutorial

In this tutorial, we will see how to replace the engine oil in the Suzuki GSX-S150, a very simple and quick operation. First of all, we need to wait until the engine is cool enough, after which we will remove the lower cover and place a container underneath the motorcycle.

Next, we locate the drain hole bolt, unscrew it using a socket wrench, and let all the oil in the system drain out. At this point, all that’s left to do is open the filter cap, insert the replacement, reassemble everything, and pour in the required amount of oil through the designated upper hole.


Posted on 1 December 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the Suzuki GSX S150?
How to Change the Engine Oil in the Suzuki GSX S150?
Gsx S 150 .. how to change the engine oil in the Suzuki GSX S150, a very simple and quick operation to perform every 12 months. First, ensure the engine is sufficiently.. …
How to Reset the Oil Service on a Suzuki GSX-S150?
How to Reset the Oil Service on a Suzuki GSX-S150?
Gsx S 150 .. see how to reset the oil service on a Suzuki GSX-S150, an extremely simple and quick operation to perform only after completing the required scheduled.. …
How to Set the Time on the Suzuki GSX S150?
How to Set the Time on the Suzuki GSX S150?
Gsx S 150 .. will see how to set the time on the Suzuki GSX S150, a very simple and quick operation to perform, for example, after replacing the battery or following.. …

How to Replace the Headlight Bulbs on a Kawasaki ZX-10R

In this tutorial, you will see how to replace the headlight bulbs on a Kawasaki ZX-10R, a very simple and quick operation. Before proceeding, ensure the key is not inserted for safety. Start by locating the circular cap at the rear of the headlamp, then unscrew it and disconnect the power connector. Next, release the metal clip, extract the old bulb from the housing, and without touching the glass directly with your bare hands, insert the replacement. Finally, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos