Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Gsx S 150
Part: Clock

In this tutorial, you will see how to set the time on the Suzuki GSX S150, a very simple and quick operation to perform, for example, after replacing the battery or following the switch to daylight saving time. First, insert the key and turn on the instrument panel, then press and hold the two buttons located at the bottom edge of the dashboard. Once the clock starts flashing, repeatedly press the "SEL" button to change the hour, use the "ADJ" button to change the minutes, and save the setting by holding both buttons down one last time.

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil service on the Suzuki GSX-S150?
How to reset the oil service on the Suzuki GSX-S150?
Gsx S 150 In this tutorial we can see how to reset the oil service on the Suzuki GSX-S150, an extremely simple and fast operation, to be carried out only once …
How to replace the engine oil in the Suzuki GSX S150?
How to replace the engine oil in the Suzuki GSX S150?
Gsx S 150 In this tutorial we can see how to replace the engine oil in the Suzuki GSX S150, an extremely simple and quick operation, to be carried out every 12…
How to replace the engine oil in the Suzuki GSX-S150?
How to replace the engine oil in the Suzuki GSX-S150?
Gsx S 150 In this tutorial, we will see how to replace the engine oil in the Suzuki GSX-S150, a very simple and quick operation. First of all, we need to wait …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos