Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service on a Suzuki GSX-S150?

Model: Suzuki Gsx S 150
Part: Service warning light

Video tutorial

In this tutorial, you will see how to reset the oil service on a Suzuki GSX-S150, an extremely simple and quick operation to perform only after completing the required scheduled maintenance work. First, insert the key and leave it in the first position, then press and hold the "SEL" button located on the left side of the dashboard while simultaneously turning on the instrument panel.

Keep the button pressed until the service light flashes 3 times, restart the panel, and check that the operation was successful.


Updated on 14 October 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the Suzuki GSX S150?
How to Change the Engine Oil in the Suzuki GSX S150?
Gsx S 150 .. how to change the engine oil in the Suzuki GSX S150, a very simple and quick operation to perform every 12 months. First, ensure the engine is sufficiently.. …
How to replace the engine oil in the Suzuki GSX-S150?
How to replace the engine oil in the Suzuki GSX-S150?
Gsx S 150 .. how to replace the engine oil in the Suzuki GSX-S150, a very simple and quick operation. First of all, we need to wait until the engine is cool enough,.. …
How to Set the Time on the Suzuki GSX S150?
How to Set the Time on the Suzuki GSX S150?
Gsx S 150 .. will see how to set the time on the Suzuki GSX S150, a very simple and quick operation to perform, for example, after replacing the battery or following.. …

How to Replace the Headlight Bulbs on a Kawasaki ZX-10R

In this tutorial, you will see how to replace the headlight bulbs on a Kawasaki ZX-10R, a very simple and quick operation. Before proceeding, ensure the key is not inserted for safety. Start by locating the circular cap at the rear of the headlamp, then unscrew it and disconnect the power connector. Next, release the metal clip, extract the old bulb from the housing, and without touching the glass directly with your bare hands, insert the replacement. Finally, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos