Do it yourself
Frequently asked questions about cars and motorcycles
Position the motorcycle on the rear or front workshop stand. Remove the caliper retaining bolts and take the caliper off the wheel bracket. Use a screwdriver to detach the old pads from the brake caliper. Clean the brake caliper thoroughly with a brush. Fit the new pads onto the caliper; attach the caliper to the brake disc. Tighten all bolts and test the braking (check if bleeding is needed). Prepare to perform the same operations on the other calipers on the motorcycle.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Gsxr 750 As shown in this tutorial, replacing the front brake pads on the Suzuki GSXR 750 is an extremely simple and quick task. First, position yourself in f…
Gsxr 750 In this video tutorial, you will learn how to remove and replace the rear brake pads on a Suzuki Gsx-R 750. First, position the bike on a stand and u…
Gsxr 750 Remove and unscrew the two bolts that secure the brake caliper (and clean them well before reattaching at the end of the operation). At this point, y…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos