Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
How to change the oil and engine filter on a Suzuki Bandit 1250? Position the motorcycle on the stand; remove the plastic filler cap and use a spanner to unscrew the oil sump plug (drain the fluid into a container). Unscrew the oil filter with a strap wrench. Remove the worn oil filter and fit a new one after cleaning (apply a bit of oil around the filter). Finally, top up the new fluid in the engine and close with the plastic cap. Test the motorcycle's operation by starting it.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing the Engine Oil and Oil Filter of the Suzuki Bandit 1250
Changing the Engine Oil and Oil Filter of the Suzuki Bandit 1250
Bandit 1250 Let’s briefly see how to perform the routine maintenance service by changing the engine oil and oil filter on the Suzuki Bandit 1250. First, place th…
How do you replace the exhaust pipe of the Suzuki Bandit 1250?
How do you replace the exhaust pipe of the Suzuki Bandit 1250?
Bandit 1250 In order to replace the exhaust pipe of the Suzuki Bandit 1250, you need to loosen the screws that secure the exhaust terminal to its housing, next t…
Removing the Fuel Tank from the Suzuki Bandit 1250
Removing the Fuel Tank from the Suzuki Bandit 1250
Bandit 1250 In this guide, you will see the steps to remove and replace the fuel tank of the Suzuki Bandit 1250. First, place the motorcycle on a stand and begin…

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos