Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Air Filter Replacement for Suzuki GSX R1000 K8

Model: Suzuki Gsxr 1000
Part: Air filter

Video tutorial

This guide describes how to replace the air filter on a Suzuki GSX R1000 K8. Obtain the Suzuki air filter 13780-41G00. Position the motorcycle on its side stand with the front wheel straight. Remove the passenger seat.

Using a ratchet and a 10mm socket, remove the fixing screw located at the front of the tank fairing. Remove the two side Allen screws from the seat and slide it towards the rear.

Lift the tank fairing and place a support rod underneath. Use a cross-head screwdriver to remove the screws on the air box cover.

Disconnect the rubber hose using pliers. Don’t forget to also remove the screw located in the centre of the air box cover.

Extract the filter and install the new filter. Reassemble everything as per disassembly.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the Suzuki GSX-R1000
How to Change the Engine Oil in the Suzuki GSX-R1000
Gsxr 1000 In this tutorial, you will see how to change the engine oil in the Suzuki GSX-R1000, a very simple and quick operation. First, wait for the engine to…
Replacing the Air Filter on the Suzuki Gsx-r 1000
Replacing the Air Filter on the Suzuki Gsx-r 1000
Gsxr 1000 Here’s how to remove and replace the engine air filter on the Suzuki Gsx-r 1000 in simple, quick steps. First, remove the rider's seat to access the …
How to replace the rear brake pads on the Suzuki GSX-R 1000
How to replace the rear brake pads on the Suzuki GSX-R 1000
Gsxr 1000 Below are the main instructions for removing and replacing the rear brake pads on the Suzuki GSX-R 1000 motorcycle. First, place your bike on a stand…

How to Change the Engine Oil in the Yamaha MT-15?

In this tutorial, you will learn how to change the engine oil in the Yamaha MT-15, a very simple and quick operation. First, ensure that the engine is cool enough. Then, position a container beneath the motorcycle, locate the drain bolt, and loosen it using a socket spanner. Allow all the oil in the system to drain out. Next, open the filter cap and insert the replacement. Finally, reassemble everything and pour in the required amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos