Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial, you will see how to change the engine oil in the Suzuki GSX-R1000, a very simple and quick operation. First, wait for the engine to cool down sufficiently, then remove the lower fairings and position a container underneath the bike. Next, locate the drain hole bolt, unscrew it using a 17mm socket, and allow all the oil in the system to drain out. At this point, simply unscrew the old filter, tighten the replacement, reassemble everything, and pour in the required amount of oil through the designated hole.

Posted on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Gsxr 1000 .. how to replace the air filter on a Suzuki GSX R1000 K8. Obtain the Suzuki air filter 13780-41G00. Position the motorcycle on its side stand with the.. …
Gsxr 1000 This tutorial shows how to change the engine oil in a Suzuki GSX-R 1000, a very simple and quick operation. Before proceeding, wait for the engine to…
Gsxr 1000 Here’s how to remove and replace the engine air filter on the Suzuki Gsx-r 1000 in simple, quick steps. First, remove the rider's seat to access the …

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos