Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wheel Speed Sensor on the Suzuki SV 650

Model: Suzuki Sv 650

Video tutorial

In this guide, you will find instructions to remove and replace the front wheel speed sensor on the Suzuki SV 650. The speed sensor located on the front wheel sends information to the speedometer; lift the motorcycle with the appropriate stand and remove the front wheel, disconnecting the sensor from the wheel and the cable from the instrument cluster, as shown in the video.

Now, install the new speed sensor, securing it properly between the wheel and the front fork; connect the cable behind the instrument cluster, checking the correct speed reading.


Posted on 13 April 2026 by ScegliAuto


Related tutorials

Removing the Front Wheel of the Suzuki SV 650
Removing the Front Wheel of the Suzuki SV 650
Sv 650 In this video tutorial, we will see the instructions that will allow us to remove and replace the front wheel of the Suzuki SV 650 in simple and quic…
How to replace the front wheel bearing of the Suzuki SV 660
How to replace the front wheel bearing of the Suzuki SV 660
Sv 650 Below are the main instructions that will allow us to disassemble and replace the front wheel bearing of the Suzuki SV 650 motorcycle. First, we put …
How to Replace the Front Indicator Bulb on a Suzuki SV 650
How to Replace the Front Indicator Bulb on a Suzuki SV 650
Sv 650 To replace the front indicator bulb on a Suzuki SV 650, loosen the corresponding headlamp by unscrewing the screw that secures it from the inside. On…

How to Replace the Clutch on a Yamaha TTR 125LE?

To replace the clutch on the Yamaha TTR 125LE, you will need to loosen the screws that secure the specific cover located on the right side of the bike, in the lower central area: once the cover has been removed, you will be able to identify the discs that make up the clutch underneath. Now loosen the screws that secure the discs so that they can all be extracted: after removal, you can insert the new clutch into its housing, securing all the discs and then covering everything with the cover to check its operation.

Watch the video!


by ScegliAuto

More videos