Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Rmz250
Part: Engine oil

This guide describes how to replace the engine oil and filter on a Suzuki RMZ250 4-stroke. Obtain 2 litres of Motul 5100 SAE 10W40 and a HIFLO HF207 filter. Position the bike on a centre stand. Place a container for the used oil underneath the engine. Using a ratchet and a 14 mm socket, remove the oil drain plug located under the engine and allow all the oil to drain out. With the ratchet, remove the plug on the left side of the engine, at the bottom, near the sprocket. Pull out the plug to let more oil escape. Clean the plug thoroughly. Using a ratchet and a 10 mm socket, remove the oil filter cover located on the right side, above the casing. Remove the old filter and replace it with the new one. Open the oil filler neck located on the left side of the casing. Pour in 1,100 cc of oil.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil of the Suzuki RM-Z 250
How to change the engine oil of the Suzuki RM-Z 250
Rmz250 Today, we will see in this video tutorial how to perform the regular maintenance service by replacing the engine oil and oil filter of the Suzuki RM-…
How to Replace the Forks on a Suzuki RMZ 250?
How to Replace the Forks on a Suzuki RMZ 250?
Rmz250 To replace the forks on a Suzuki RMZ 250, loosen the nuts securing the front wheel spindle so that the wheel can be removed, also disconnecting the c…
How to Replace the Spark Plug on the Suzuki RMZ 250?
How to Replace the Spark Plug on the Suzuki RMZ 250?
Rmz250 To replace the spark plug on the Suzuki RMZ 250, you need to unscrew the bolts that secure the seat to its housing, allowing it to be removed along w…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos