Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Rmz250
Part: Spark plugs

To replace the spark plug on the Suzuki RMZ 250, you need to unscrew the bolts that secure the seat to its housing, allowing it to be removed along with the side panels at the front of the bike. Once all these parts are removed, you will be able to access the tank underneath, which must also be removed by disconnecting its connectors and unscrewing its fixing bolts. Beneath it, on the left side, you will find the connector connected to the spark plug, which must be disconnected in order to extract the spark plug with the appropriate socket tool. You can then replace it and reassemble all the components removed earlier.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Forks on a Suzuki RMZ 250?
How to Replace the Forks on a Suzuki RMZ 250?
Rmz250 To replace the forks on a Suzuki RMZ 250, loosen the nuts securing the front wheel spindle so that the wheel can be removed, also disconnecting the c…
How to change the engine oil of the Suzuki RM-Z 250
How to change the engine oil of the Suzuki RM-Z 250
Rmz250 Today, we will see in this video tutorial how to perform the regular maintenance service by replacing the engine oil and oil filter of the Suzuki RM-…
Engine Oil and Oil Filter Replacement for Suzuki RMZ250 4T 2008
Engine Oil and Oil Filter Replacement for Suzuki RMZ250 4T 2008
Rmz250 This guide describes how to replace the engine oil and filter on a Suzuki RMZ250 4-stroke. Obtain 2 litres of Motul 5100 SAE 10W40 and a HIFLO HF207 …

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos