Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Frame Sliders on a Suzuki GSX-R 600

Model: Suzuki Gsxr 600
Part:

This video is currently unavailable

In this guide, you will learn how to fit aluminium frame sliders without damaging the fairings! As shown in the video, unscrew the bolts that secure the side fairing, not because you need to remove it, but just to keep it slightly open so you can work behind it. When you can keep the fairing away from the bike, use the central hole where you removed the bolt to secure the slider.

Position it so that its fixing hole aligns with that of the fairing and ensure the slider does its job. Repeat on both sides.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

How to Replace the Battery of the Suzuki GSX-R 600
How to Replace the Battery of the Suzuki GSX-R 600
Gsxr 600 .. Replacing the battery of the Suzuki GSX-R 600, as well as the GSX-R 750, is a task that takes just a few minutes and a simple socket spanner... …
How to Replace the Front Headlamp Bulb on a Suzuki GSX-R 600
How to Replace the Front Headlamp Bulb on a Suzuki GSX-R 600
Gsxr 600 .. the front headlamp bulb on the Suzuki GSX-R 600 motorcycle. First, place the bike on a stand and begin by removing the plastic cover protecting.. …
How to Replace the Stator on a Suzuki GSX R 600?
How to Replace the Stator on a Suzuki GSX R 600?
Gsxr 600 .. To replace the stator on a Suzuki GSX R 600, loosen the screws securing the cover located on the right side of the bike, in the lower central.. …

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos