Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Is it time to change the transmission oil? Here’s how to replace the transmission oil on the Burgman 125. Secure the scooter on the centre stand and begin by removing the air filter. Unscrew the securing bolt of the container located next to the engine casing. Allow the oil to drain into a container. Once drained, you can screw in the oil bolt. Unscrew the transmission oil filler bolt. Refill with the new oil recommended by the manufacturer for the transmission. Use a suitable syringe for the transmission refill. Start the vehicle for a functionality test.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the engine oil of the Suzuki Burgman 125?
How do you replace the engine oil of the Suzuki Burgman 125?
Burgman 125 It will be possible to perform the oil change of the Suzuki Burgman 125 by loosening the drain plug located in the central lower part of the motorcyc…
How to reset the oil light on a Suzuki Burgman 125
How to reset the oil light on a Suzuki Burgman 125
Burgman 125 To manually reset the oil light on your Suzuki Burgman 125, follow these simple steps. This is an easy procedure that anyone can complete without any…
Replace the Engine Oil and Oil Filter on the Suzuki Burgman
Replace the Engine Oil and Oil Filter on the Suzuki Burgman
Burgman 125 This video will briefly show you how to carry out routine maintenance by replacing the engine oil and the small oil filter on the Suzuki Burgman 125 …

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos