Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Front Brake Pads on Suzuki Bandit

Model: Suzuki Bandit 1250
Part: Brake pads

Video tutorial

First, loosen the pin (wait to remove it) that holds the front brake pads in place using a 5 mm Allen key. Now unscrew the two bolts that anchor the caliper to the brake disc using a socket wrench. At this point, you can extract the caliper from the disc and finish unscrewing the central pin, but before doing this, you need to remove the pin with tweezers.

Now extract the pads from the caliper, widen the slots (as the new pads will obviously be thicker), and insert the new pads you purchased. Reassemble everything and you're done.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Oil Change on a Suzuki Bandit 1250
Oil Change on a Suzuki Bandit 1250
Bandit 1250 How to change the oil and engine filter on a Suzuki Bandit 1250? Position the motorcycle on the stand; remove the plastic filler cap and use a spanne…
Changing the Engine Oil and Oil Filter of the Suzuki Bandit 1250
Changing the Engine Oil and Oil Filter of the Suzuki Bandit 1250
Bandit 1250 Let’s briefly see how to perform the routine maintenance service by changing the engine oil and oil filter on the Suzuki Bandit 1250. First, place th…
How do you replace the exhaust pipe of the Suzuki Bandit 1250?
How do you replace the exhaust pipe of the Suzuki Bandit 1250?
Bandit 1250 In order to replace the exhaust pipe of the Suzuki Bandit 1250, you need to loosen the screws that secure the exhaust terminal to its housing, next t…

How to Replace the Headlight Bulbs on a Kawasaki ZX-10R

In this tutorial, you will see how to replace the headlight bulbs on a Kawasaki ZX-10R, a very simple and quick operation. Before proceeding, ensure the key is not inserted for safety. Start by locating the circular cap at the rear of the headlamp, then unscrew it and disconnect the power connector. Next, release the metal clip, extract the old bulb from the housing, and without touching the glass directly with your bare hands, insert the replacement. Finally, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos