Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery replacement on Suzuki Burgman 400

Model: Suzuki Burgman 400
Part: Battery

Video tutorial

On the Suzuki Burgman 400, the battery is located behind the front glove compartment. Open the glove compartment and unscrew the screw on the left side, as shown in the video.

Remove the cover secured by this screw, and there is the battery! Using a cross-head screwdriver of the correct size or a 10 mm socket, unscrew and disconnect the two terminals: always start with the negative terminal before moving to the positive. Pull the battery out using the handle, then insert the new battery and reverse the steps for reassembly.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on the Suzuki Burgman 400
How to Reset the Oil Light on the Suzuki Burgman 400
Burgman 400 If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, follow this guide and apply the steps described. First, e…
How to replace the front bulb on a Suzuki Burgman 400
How to replace the front bulb on a Suzuki Burgman 400
Burgman 400 Before starting, position your Suzuki Burgman 400 on the centre stand, then turn the front wheel to the right. Next, lean down near the front headlam…
How to Replace the Battery on a Suzuki Burgman 400?
How to Replace the Battery on a Suzuki Burgman 400?
Burgman 400 To replace the battery on the Suzuki Burgman 400, open the glove compartment located directly under the handlebars. Inside, locate the plastic cover …

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos