|
Do it yourself
| |||
| ||||
|
Model: Suzuki Burgman 650
To replace the rear headlamp bulb on a Suzuki Burgman 650, detach the rivets located at the bottom of the rear fairing. Once the rivets are removed, pull down the fairing: this will allow you to access the connectors to which the rear headlamp bulbs are attached. Disconnect the old bulb from its connector and replace it with a new spare part. Insert the new bulb into its housing and reinstall the rear fairing.
Updated on 17 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Burgman 650
Before starting, position your Suzuki Burgman 650 on the centre stand. Begin by removing the front inner fairing by unscrewing the screws and unclipp…
Burgman 650
These short and simple steps will show us how to disassemble and replace the headlight bulb of the Suzuki Burgman 650. First, we put the scooter on t…
Burgman 650
In this video tutorial, see how to replace the front headlamp bulb on a 2007 Suzuki Burgman 650. Before replacing the bulb, you need to remove the pl…
|
How to Replace the Front Brake Pads on a Peugeot Elyseo 125
This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.325
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |