Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, see how to replace the front headlamp bulb on a 2007 Suzuki Burgman 650. Before replacing the bulb, you need to remove the plastic cover located under the headlight assembly. To do this, unscrew the two screws with a star screwdriver or a 10mm spanner. Once done, disconnect the bulb connector and then remove the protective rubber. Next, lower and pull the metal tab that holds the bulb in place, and finally remove the bulb itself. Now fit a new bulb (H7) by reversing the procedure.

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Suzuki Burgman 650
How to Replace the Front Headlight Bulb on a Suzuki Burgman 650
Burgman 650 Before starting, position your Suzuki Burgman 650 on the centre stand. Begin by removing the front inner fairing by unscrewing the screws and unclipp…
Replacement of the front headlight bulb of the Suzuki Burgman 650
Replacement of the front headlight bulb of the Suzuki Burgman 650
Burgman 650 These short and simple steps will show us how to disassemble and replace the headlight bulb of the Suzuki Burgman 650. First, we put the scooter on t…
How to Replace the Rear Headlamp Bulb on a Suzuki Burgman 650
How to Replace the Rear Headlamp Bulb on a Suzuki Burgman 650
Burgman 650 To replace the rear headlamp bulb on a Suzuki Burgman 650, detach the rivets located at the bottom of the rear fairing. Once the rivets are removed, …

How to Reset the Service Light on the Yamaha Xmax 250?

To reset the service light on the Yamaha Xmax 250, you need to insert the ignition key into the appropriate slot, so that you can turn it and switch on the instrument panel. Once this is done, press and hold the central button located on the left side of the instrument panel: the button should be held for about 20 seconds. When released, you will notice that the flashing service light has turned off: to verify that the reset has occurred correctly, you will need to switch off and then switch on the vehicle's instrument panel.

Watch the video!


by ScegliAuto

More videos