Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Start by placing your Suzuki Burgman 650 on the centre stand. Next, turn on the engine and let it run for a few minutes to help the oil drain out more easily later. Once done, unscrew and remove the lower oil drain bolt to let the engine oil out. After all the oil has drained, re-screw the drain bolt. Now, unscrew and remove the upper refill cap, then add new engine oil and re-screw the refill cap. Once you complete this step, you will have finished the oil change.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Suzuki Burgman 650 Scooter
How to Change the Engine Oil on a Suzuki Burgman 650 Scooter
Burgman 650 .. In this tutorial, we will see how to change the engine oil on a Suzuki Burgman 650 scooter, a very simple and quick operation. First,.. …
How to Change the Engine Oil on a Suzuki Burgman 650 Scooter?
How to Change the Engine Oil on a Suzuki Burgman 650 Scooter?
Burgman 650 .. In this tutorial, you will see how to change the engine oil on a Suzuki Burgman 650 scooter, an extremely simple and quick operation.. …
How to Reset the Oil Light on the Suzuki Burgman 650
How to Reset the Oil Light on the Suzuki Burgman 650
Burgman 650 If you have just performed an oil change on your Suzuki Burgman 650 and do not know how to manually reset the related warning light, then this guide …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos