Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Tank from the Suzuki GSX-R 600

Model: Suzuki Gsxr 600
Part:

Video tutorial

This guide provides instructions to remove and replace the fuel tank of the Suzuki GSX-R 600 motorcycle. First, place the motorcycle on a stand and begin by removing the rider's seat; then remove all the screws found on the upper and lower parts of the fuel tank to lift it, as shown in the video.

At this point, disconnect the fuel hose and the electrical connector of the fuel level sensor; then remove and replace the tank with the new one, applying the reverse procedure!


Updated on 3 July 2026 by ScegliAuto


Related tutorials

Replacing the Air Filter on the Suzuki GSX-R 600
Replacing the Air Filter on the Suzuki GSX-R 600
Gsxr 600 .. replace the engine air filter on the Suzuki GSX-R 600. First, place the bike on a stand and start unscrewing the screws securing the fuel tank, removing.. …
How to Replace the Battery of the Suzuki GSX-R 600
How to Replace the Battery of the Suzuki GSX-R 600
Gsxr 600 .. Replacing the battery of the Suzuki GSX-R 600, as well as the GSX-R 750, is a task that takes just a few minutes and a simple socket spanner... …
How to Replace the Spark Plugs on a Suzuki GSX R 600?
How to Replace the Spark Plugs on a Suzuki GSX R 600?
Gsxr 600 .. how to replace the spark plugs on a Suzuki GSX R 600. This operation is straightforward but requires good manual skills. First, ensure the key is not.. …

How to Replace the Stator on the Triumph Daytona 675?

To replace the stator on the Triumph Daytona 675, loosen the screws that secure the cover located on the left side of the bike: once these screws have been removed, detach the cover and access the underlying stator. The stator can be removed from its housing by unscrewing the central screws that secure it: this way, you can insert a new stator into its housing, re-inserting the side starter motor. Once these components have been reinserted, close everything with the cover.

Watch the video!


by ScegliAuto

More videos