Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
If you own a Suzuki Raider R150 and the oil warning light appears despite having already changed the fluid, you must proceed with the following manual reset procedure. First, ensure the bike is completely off and on its stand. Then locate the "Sel" and "Adj" buttons at the ends of the panel and hold them down simultaneously while turning the key to switch on the panel. Wait a few seconds, and as soon as the reset is complete, release both buttons.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Setting the Time on the Suzuki Raider R150
Setting the Time on the Suzuki Raider R150
Raider R150 In this new mini guide for all Suzuki Raider R150 owners, discover the steps to manually set the time displayed on the dashboard. First, place the mo…
How to replace the engine oil in the Yamaha Raider?
How to replace the engine oil in the Yamaha Raider?
Raider R150 As shown in this tutorial, replacing the engine oil in the Yamaha Raider is a very simple and quick operation. Before proceeding, ensure the engine i…
How to change the engine oil of a Suzuki Raider?
How to change the engine oil of a Suzuki Raider?
Raider R150 To replace the motor oil of a Suzuki Raider, start by warming up the engine for a few minutes to fluidize the oil, then turn it off. Make sure the mo…

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos