Do it yourself
Frequently asked questions about cars and motorcycles
As shown in this tutorial, replacing the engine oil in the Yamaha Raider is a very simple and quick operation. Before proceeding, ensure the engine is cool enough to work safely. Start by positioning a container underneath the bike, then locate the drain bolt and loosen it with a 17mm spanner. Once done, allow all the oil in the system to drain out, remove the old filter, and tighten the new one. At this point, simply pour in the new oil through the designated upper hole.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Raider R150 To replace the motor oil of a Suzuki Raider, start by warming up the engine for a few minutes to fluidize the oil, then turn it off. Make sure the mo…
Raider R150 If you own a Suzuki Raider R150 and the oil warning light appears despite having already changed the fluid, you must proceed with the following manua…
Raider R150 In this new mini guide for all Suzuki Raider R150 owners, discover the steps to manually set the time displayed on the dashboard. First, place the mo…

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos