Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the wheels from the Suzuki GSX-R 600

Model: Suzuki Gsxr 600
Part: Wheel

Video tutorial

This guide provides instructions on how to remove the front and rear wheels of the Suzuki GSX-R 600 in simple steps. First, place the paddock stands under the bike to lift the wheels off the ground; then start by removing the brake calipers from the discs by unscrewing the fixing bolts; next, unscrew the central axle of the wheel, disconnecting the drive chain for the rear wheel as shown in the video.

At this point, if necessary, replace the tyres or brake discs; then reassemble everything by applying the reverse procedure!


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery of the Suzuki GSX-R 600
How to Replace the Battery of the Suzuki GSX-R 600
Gsxr 600 .. Replacing the battery of the Suzuki GSX-R 600, as well as the GSX-R 750, is a task that takes just a few minutes and a simple socket spanner... …
Replacing the Rear Brake Pads on a Suzuki GSX-R 600 K7
Replacing the Rear Brake Pads on a Suzuki GSX-R 600 K7
Gsxr 600 .. and replace the rear brake pads on a Suzuki GSX-R 600 K7, following these simple steps. First, loosen the two screws securing the rear brake caliper.. …
Replacing the Air Filter on the Suzuki GSX-R 600
Replacing the Air Filter on the Suzuki GSX-R 600
Gsxr 600 .. replace the engine air filter on the Suzuki GSX-R 600. First, place the bike on a stand and start unscrewing the screws securing the fuel tank, removing.. …

How to Set the Time on a Kymco DTX360?

To set the time on a Kymco DTX360, follow these steps. First, turn on the scooter and ensure it is in time display mode on the dashboard. Once you find this mode, press and hold the button for setting the time, located on the scooter's handlebars. After a few seconds, the display will start to flash, indicating that you can now adjust the time. Use the adjustment buttons to increase or decrease the hour until you reach the desired time. When you have set the correct time, press the time setting button again to confirm your selection. The display will stop flashing and the time will be set correctly. Be sure to consult the owner's manual for specific instructions for your Kymco DTX360 model, as the procedure may vary slightly.

Watch the video!


by ScegliAuto

More videos