Do it yourself
Frequently asked questions about cars and motorcycles
In this video, you will see how to disassemble and replace the rear brake pads on a Suzuki GSX-R 600 K7, following these simple steps. First, loosen the two screws securing the rear brake caliper using a 10 mm socket spanner; then remove the central locking pin for the pads by unscrewing it with an Allen key. At this point, extract the old brake pads and clean inside the caliper; push the piston back and insert the new pads, then reassemble everything!

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Gsxr 600 This guide provides instructions on how to remove the front and rear wheels of the Suzuki GSX-R 600 in simple steps. First, place the paddock stands …
Gsxr 600 To replace the exhaust of the Suzuki GSX-R 600, you need to loosen the screws that secure the exhaust terminal to its housing, next to the rear wheel…
Gsxr 600 In this video, we will go through the main steps to perform the routine maintenance oil change on the Suzuki GSX-R 600 K8. First, remove the lower en…

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos