Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil in a Suzuki Burgman Scooter?

Model: Suzuki Burgman 650
Part: Engine oil

Video tutorial

In this tutorial, see how to change the oil in a Suzuki Burgman scooter, a very simple operation. Before proceeding, wait for the engine to cool completely.

Start by removing the central cover, then disengage the rubber from the left footrest, remove the indicated plastic rivets, and take off the lower fairing. At this point, use a 17mm spanner to unscrew the drain bolt, remove the old filter, and let all the oil from the engine drain out. Finally, fit a new filter, tighten the bolt, and pour in the required amount of oil through the fill hole.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Suzuki Burgman 650 Scooter
How to Change the Engine Oil on a Suzuki Burgman 650 Scooter
Burgman 650 In this tutorial, we will see how to change the engine oil on a Suzuki Burgman 650 scooter, a very simple and quick operation. First, ensure the engi…
How to replace the air filter in a Suzuki Burgman scooter?
How to replace the air filter in a Suzuki Burgman scooter?
Burgman 650 As we can see in this tutorial, replacing the air filter in the Suzuki Burgman 650 scooter is an extremely simple and quick operation. Before proceed…
How to Drain and Refill the Coolant on the Suzuki Burgman 650
How to Drain and Refill the Coolant on the Suzuki Burgman 650
Burgman 650 Below are the main instructions to drain and refill the coolant on the Suzuki Burgman 650 scooter. First, place the scooter on the centre stand and s…

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos