Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Placement and Diagram for the Suzuki Burgman 650

Model: Suzuki Burgman 650
Part: Fuse box

Video tutorial

This guide outlines the steps to locate the main fuses and where to find the diagram for the Suzuki Burgman 650 scooter. First, place the scooter on its centre stand and begin removing the panel or plastic cover located under the handlebars; on the left side, you will see the housing for the main fuses and the relay, as illustrated in the video.

At this point, use the owner's manual to replace any blown fuse with a new one of the same amperage as the original.


Updated on 20 August 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on the Suzuki Burgman 650
How to Reset the Oil Light on the Suzuki Burgman 650
Burgman 650 If you have just performed an oil change on your Suzuki Burgman 650 and do not know how to manually reset the related warning light, then this guide …
How to reset the oil warning light on the Suzuki Burgman 650
How to reset the oil warning light on the Suzuki Burgman 650
Burgman 650 If you have just changed the oil on the Suzuki Burgman 650 and still notice the oil warning light is on, do not worry; simply perform the following r…
How to Replace the Front Headlight Bulb on a Suzuki Burgman 650
How to Replace the Front Headlight Bulb on a Suzuki Burgman 650
Burgman 650 Before starting, position your Suzuki Burgman 650 on the centre stand. Begin by removing the front inner fairing by unscrewing the screws and unclipp…

How to Replace the Stator on the Triumph Daytona 675?

To replace the stator on the Triumph Daytona 675, loosen the screws that secure the cover located on the left side of the bike: once these screws have been removed, detach the cover and access the underlying stator. The stator can be removed from its housing by unscrewing the central screws that secure it: this way, you can insert a new stator into its housing, re-inserting the side starter motor. Once these components have been reinserted, close everything with the cover.

Watch the video!


by ScegliAuto

More videos