Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
It is necessary to regularly perform the routine maintenance service on the engine to ensure its longevity; let’s see how to replace the engine oil and oil filter of the Suzuki GSX 1400. First, place your motorcycle on the centre stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew and replace the oil filter cartridge with a new one, as shown in the video. At this point, unscrew the filler cap and top up with new engine oil, filling to the maximum level mark!

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil of the Suzuki GSX 1400?
How to Replace the Engine Oil of the Suzuki GSX 1400?
Gsx 1400 To replace the engine oil of the Suzuki GSX 1400, loosen the drain plug of the oil tank, which can be completely removed to collect all the used oil …
How do you replace the headlight bulb of the Suzuki GSX 1400?
How do you replace the headlight bulb of the Suzuki GSX 1400?
Gsx 1400 In order to replace the headlight bulb of the Suzuki GSX 1400, you need to loosen the screws that secure the headlight assembly to its housing: these…
How to Replace the Rear Brake Pads on a Suzuki GSX 1400
How to Replace the Rear Brake Pads on a Suzuki GSX 1400
Gsx 1400 Follow these step-by-step instructions to remove and replace the rear brake pads on a Suzuki GSX 1400. First, place your motorcycle on the centre sta…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos